ZyXEL Communications EES-1024AF Switch User Manual


 
EES-1024AF Intelligent Ethernet Switch
Using the Web Configurator 6-1
This section introduces the configuration and functions of the Web Configurator.
6.1 Introduction
The embedded Web Configurator offers advanced management features and allows you to manage the switch from
anywhere on the network through a standard browser such as Microsoft Internet Explorer or Navigator.
The Web Configurator supports Internet Explorer 4.0 and Netscape Communicator 4.x and later versions. It is
based on Java Applets with an aim to reduce network bandwidth consumption, enhance access speed and present an
easy viewing screen.
By default, Internet Explorer 4.0 does not allow Java Applets to open sockets. The user has to
explicitly modify the browser setting to enable Java Applets to use network ports. See Appendix
A Microsoft Internet Explorer Setup. You don’t need to change any configuration if you use
Netscape browser. However, Netscape browser doesn’t support TFTP firmware upgrade.
6.2 System Login
Disconnect the Console port connection before launching the Web Configurator.
Step 1. Start Internet Explorer or Netscape Communicator web browser.
Step 2. Type http:// and the IP address of the switch ( for example, the default is 192.168.1.1 ) in the Location or
Address field. Press Enter.
Figure 6-1 Web Configurator - Login
Step 3. The Password screen appears. Type user name and password. The default is root for both.
Step 4. Click Ok. The Home page of the Web Configurator displays.
Chapter 6
Using
the Web Configurator