Filter
Top Products
Chapter 7 Wireless LAN
NBG-460N User’s Guide
107
7.4.4 WPA/WPA2
Click Network > Wireless LAN to display the General screen. Select WPA or
WPA2 from the Security Mode list.
Figure 77 Network > Wireless LAN > General: WPA/WPA2
Idle Timeout The NBG-460N automatically disconnects a wireless station from the
wired network after a period of inactivity. The wireless station needs to
enter the username and password again before access to the wired
network is allowed. The default time interval is 3600 seconds (or 1
hour).
Group Key
Update Timer
The Group Key Update Timer is the rate at which the AP (if using
WPA-PSK/WPA2-PSK key management) or RADIUS server (if using
WPA/WPA2 key management) sends a new group key out to all
clients. The re-keying process is the WPA/WPA2 equivalent of
automatically changing the WEP key for an AP and all stations in a
WLAN on a periodic basis. Setting of the Group Key Update Timer is
also supported in WPA-PSK/WPA2-PSK mode. The default is 1800
seconds (30 minutes).
Apply Click Apply to save your changes back to the NBG-460N.
Reset Click Reset to reload the previous configuration for this screen.
Table 32 Network > Wireless LAN > General: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION