Filter
Top Products
NBG-460N User’s Guide
231
CHAPTER 16
Static Route
16.1 Overview
This chapter shows you how to configure static routes for your NBG-460N.
The NBG-460N usually uses the default gateway to route outbound traffic from
computers on the LAN to the Internet. To have the NBG-460N send data to
devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the NBG-460N’s
LAN interface. The NBG-460N routes most traffic from A to the Internet through
the NBG-460N’s default gateway (R1). You create one static route to connect to
services offered by your ISP behind router R2. You create another static route to
communicate with a separate network behind a router R3 connected to the LAN.
Figure 143 Example of Static Routing Topology
16.2 What You Can Do
•Use the IP Static Route screen (Section 16.3 on page 232) to view existing
static route rules.
WAN
R1
R2
A
R3
LAN