Filter
Top Products
NBG-460N User’s Guide
235
CHAPTER 17
Bandwidth Management
17.1 Overview
This chapter contains information about configuring bandwidth management and
editing rules.
ZyXEL’s Bandwidth Management allows you to specify bandwidth management
rules based on an application.
In the figure below, uplink traffic goes from the LAN device (A) to the WAN device
(B). Bandwidth management is applied before sending the packets out to the
WAN. Downlink traffic comes back from the WAN device (B) to the LAN device
(A). Bandwidth management is applied before sending the traffic out to LAN.
Figure 146 Bandwidth Management Example
17.2 What You Can Do
•Use the General screen (Section 17.4 on page 236) to enable bandwidth
management and assign bandwidth values.
•Use the Advanced screen (Section 17.5 on page 238) to configure bandwidth
managements rule for the pre-defined services and applications.
•Use the Monitor screen (Section 17.6 on page 242) to view the amount of
network bandwidth that applications running in the network are using.
A
B
-> VOIP
-> FTP
-> HTTP
-> Chat, Email