Filter
Top Products
Chapter 7 Wireless LAN
NBG-460N User’s Guide
125
2 On the iPod Touch’s main screen press Settings > Wi-fi and from the list press
the NBG-460N’s network name (SSID) to connect to it. If you are prompted for
any security settings enter them and press connect. If you cannot connect check
your security settings in the Web Configurator from your computer and try again.
3 After connecting to the NBG-460N’s wireless LAN network launch the iPod Touch
Internet browser and enter the NBG-460N’s IP address (default: 192.168.1.1) into
the address bar. The login screen displays.
7.13.2 Login Screen
After accessing the NBG-460N’s IP address in the iPod Touch web browser the
screen below will display.
Note: You cannot change your password in the iPod Touch Web Configurator. To
change your password log into the Web Configurator using your computer.
Figure 89 Login Screen
The following table describes the labels in this screen.
Table 45 Login Screen
LABEL DESCRIPTION
Auto Login Select this checkbox to automatically log into the iPod Touch Web
Configurator when accessing it through the same iPod Touch device.
Password Enter the password for the NBG-460N. If you haven’t changed the
default password earlier this is “1234”.
Login Press the Login button to log into the iPod Touch Web Configurator.
Reset Press the Reset button to clear your selections and start over.