Filter
Top Products
Chapter 5 Tutorials
NBG-460N User’s Guide
69
The following figure shows you an example to set up wireless network and
security by pressing a button on both NBG-460N and wireless client (the
NWD210N in this example).
Figure 37 Example WPS Process: Push Button Configuration Method
5.2.1.2 PIN Configuration
When you use the PIN configuration method, you need to use both NBG-460N’s
configuration interface and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and
select the PIN method to get a PIN number.
2 Enter the PIN number to the PIN field in the Network > Wireless LAN > WPS
Station screen on the NBG-460N.
3 Click Start buttons (or button next to the PIN field) on both the wireless client
utility screen and the NBG-460N’s WPS Station screen within two minutes.
The NBG-460N authenticates the wireless client and sends the proper
configuration settings to the wireless client. This may take up to two minutes.
Then the wireless client is able to communicate with the NBG-460N securely.
Wireless Client
NBG460N
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES