Filter
Top Products
Chapter 7 Wireless LAN
NBG-460N User’s Guide
120
The following table describes the labels in this screen. Refer to Table 41 on page
118 for descriptions of other fields in this screen.
Table 42 Network > Wireless LAN > WDS (Static WEP)
LABEL DESCRIPTION
Passphrase Enter the passphrase or string of text used for automatic WEP key
generation on wireless client adapters.
Generate Click this to get the keys from the Passphrase you entered.
WEP Encryption Select 64-bit WEP or 128-bit WEP to enable data encryption.
Authentication
Method
There are two types of WEP authentication namely, Open System and
Shared Key.
Open system is implemented for ease-of-use and when security is not
an issue. The wireless station and the AP or peer computer do not share
a secret key. Thus the wireless stations can associate with any AP or
peer computer and listen to any transmitted data that is not encrypted.
Shared key mode involves a shared secret key to authenticate the
wireless station to the AP or peer computer. This requires you to enable
the wireless LAN security and use same settings on both the wireless
station and the AP or peer computer.
•Select Shared Key to have the NBG-460N authenticate only those
wireless clients that use Shared Key mode and have the correct WEP
key.
•Select Auto to have the NBG-460N allow association with wireless
clients that use Open System mode. Data transfer is encrypted as
long as the wireless client has the correct WEP key for encryption.
The NBG-460N authenticates wireless clients using Shared Key
mode that have the correct WEP key.
ASCII/HEX
Keys 1 to 4t
The WEP keys are used to encrypt data. Both the NBG-460N and the
wireless stations must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10
hexadecimal characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26
hexadecimal characters ("0-9", "A-F").
You must configure all four keys, but only one key can be activated at
any one time. The default key is key 1.