Chapter 7 Wireless LAN
NBG-460N User’s Guide
119
7.11.1 Security Mode: Static WEP
Use this screen to configure the Static WEP security for your NBG-460N when it
is in AP+Bridge or Bridge Only mode.
Figure 86 Network > Wireless LAN > WDS (Static WEP)
Security Mode
Note: WDS security is independent of the security settings
between the NBG-460N and any wireless clients.
The WDS is set to No Security by default.
• Refer to Section 7.11.1 on page 119 to view the screen for Static
WEP security.
• Refer to Section 7.11.2 on page 121 to view the screen for WPA2-
PSK security.
Apply Click Apply to save your changes to NBG-460N.
Refresh Click Refresh to reload the previous configuration for this screen.
Table 41 Network > Wireless LAN > WDS (No Security)
LABEL DESCRIPTION