Filter
Top Products
Chapter 18 Remote Management
NBG-460N User’s Guide
249
18.4 WWW Screen
Use this screen to define the interface/s from which the NBG-460N can be
managed remotely using the web and specify a secure client that can manage the
NBG-460N.
To change your NBG-460N’s World Wide Web settings, click Management >
Remote MGMT to display the WWW screen.
Figure 152 Management > Remote MGMT > WWW
The following table describes the labels in this screen.
Table 83 Management > Remote MGMT > WWW
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however
you must use the same port number in order to use that service for
remote management.
Server Access Select the interface(s) through which a computer may access the NBG-
460N using this service.
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate
with the NBG-460N using this service.
Select All to allow any computer to access the NBG-460N using this
service.
Choose Selected to just allow the computer with the IP address that you
specify to access the NBG-460N using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.