Filter
Top Products
Chapter 13 Firewall
NBG-460N User’s Guide
185
13.5.1 The Add Firewall Rule Screen
If you click Add or the Modify icon on an existing rule, the Add Firewall Rule
screen is displayed. Use this screen to add a firewall rule or to modify an existing
one.
Figure 125 Security > Firewall > Services > Adding a Rule
The following table describes the labels in this screen.
Table 64 Security > Firewall > Services > Adding a Rule
LABEL DESCRIPTION
Active Select this check box to turn the rule on.
Address Type Do you want your rule to apply to packets with a particular (single) IP, a
range of IP addresses (for example 192.168.1.10 to 192.169.1.50), a
pool of IP address or any IP address? Select an option from the drop-
down list box that includes: Any IP, Single IP, IP Range and IP
Pool.
IP Address Enter the single IP address here. This field is only available when
Single IP is selected as the Address Type.
Start IP
Address
Enter the starting IP address in a range here. This field is only available
when IP Range is selected as the Address Type.