Filter
Top Products
Chapter 17 Bandwidth Management
NBG-460N User’s Guide
240
17.5.1 Rule Configuration with the Pre-defined Service
To edit a bandwidth management rule for the pre-defined service in the NBG-
460N, click the Edit icon in the Application List table of the Advanced screen.
The following screen displays.
Figure 149 Bandwidth Management Rule Configuration: Pre-defined Service
User-defined
Service
Use this table to allocate specific amounts of bandwidth to specific
applications or services you specify.
# This is the number of an individual bandwidth management rule.
Enable Select this check box to have the NBG-460N apply this bandwidth
management rule.
Direction Select To LAN to apply bandwidth management to traffic from WAN to
LAN.
Select To WAN to apply bandwidth management to traffic from LAN/
WLAN to WAN.
Select To WLAN to apply bandwidth management to traffic from WAN
to WLAN.
Service Name Enter a descriptive name of up to 19 alphanumeric characters, including
spaces.
Priority Select a priority from the drop down list box. Choose High, Mid or
Low.
Modify Click the Edit icon to open the Rule Configuration screen. Modify an
existing rule or create a new rule in the Rule Configuration screen.
See Section 17.5.2 on page 241 for more information.
Click the Remove icon to delete a rule.
Apply Click Apply to save your customized settings.
Reset Click Reset to begin configuring this screen afresh.
Table 77 Management > Bandwidth MGMT > Advanced (continued)
LABEL DESCRIPTION