Filter
Top Products
Chapter 5 Tutorials
NBG-460N User’s Guide
75
However, you want the communication between Y and Z to be secure. WDS
encrypts the data transfer between bridged devices. You can enable this in the
Security fields of the WDS screen.
Figure 45 AP + Bridge Scenario
5.2.4.1 Configuring Your Bridge Mode Settings
You should know the MAC address of the other NBG-460N to establish the bridge
connection. Additionally, the wireless settings of both Y and Z must be the same
for the connection to work. Follow the steps below to configure your NBG-460N’s
wireless setup and WDS security.
1 In the Wireless LAN > General Settings screen, be sure you have the Enable
Wireless LAN checked. Choose the Channel and Channel Width of the NBG-
460N. Both Y and Z must have the same Channel and Channel Width.
Figure 46 Tutorial: Wireless LAN > General Settings
File Server
B
A
Y
Z