Filter
Top Products
Chapter 5 Tutorials
NBG-460N User’s Guide
80
2 Select the Active checkbox to enable the VPN rule after it has been created. Make
sure IKE is selected as the IPSec Keying Mode.
Figure 55 Tutorial: Property
3 Enter the IP address “10.0.0.7” in the Local Address text box. This is the IP
address of Jack’s computer. Enter the IP address “10.0.0.7” in the Local Address
End/Mask text box. This value is the same as Jack only wants Bob to access this
single IP address.
Figure 56 Tutorial: Local Policy
4 Enter the IP address “192.168.1.35” in the Remote Address Start text box. This
is the IP address of Jack’s computer. Enter the IP address “192.168.1.35” in the
Remote Address End/Mask text box. This value is the same as Bob only wants
Jack to access this single IP address.
Figure 57 Tutorial: Remote Policy
5 Enter the IP address “2.2.2.2” in the My IP Address text box. This is Jack’s WAN
IP address.
6 Select IP as the Local ID Type. This is the type of content that will be used to
identify Jack’s NBG-460N. Enter the IP address “2.2.2.2” in the Local Content
text box. This identifies Jack’s NBG-460N to Bob’s NBG-460N.
7 Enter the IP address “1.1.1.1” in the Secure Gateway Address text box. This is
Bob’s WAN IP address.