Filter
Top Products
ZyWALL 2 Series User’s Guide
Remote Management Screens 17-19
Step 3. Use the “put” command to upload a new firmware to the ZyWALL.
Figure 17-17 Secure FTP: Firmware Upload Example
17.11 Telnet
You can configure your ZyWALL for remote Telnet access as shown next.
Figure 17-18 Telnet Configuration on a TCP/IP Network
$ sftp -1 192.168.1.1
Connecting to 192.168.1.1...
The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.
RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.1.1' (RSA1) to the list of known hosts.
Administrator@192.168.1.1's password:
sftp> put firmware.bin ras
Uploading firmware.bin to /ras
Read from remote host 192.168.1.1: Connection reset by peer
Connection closed
$