Filter
Top Products
ZyWALL 2 Series User’s Guide
SNMP Configuration 31-1
Chapter 31
SNMP Configuration
This chapter explains SNMP configuration menu 22.
31.1 SNMP Configuration
To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP Configuration as shown
next. The “community” for Get, Set and Trap fields is SNMP terminology for password.
Figure 31-1 Menu 22: SNMP Configuration
The following table describes the SNMP configuration parameters.
Table 31-1 Menu 22: SNMP Configuration
FIELD DESCRIPTION EXAMPLE
Get Community Type the Get community, which is the password for the incoming
Get- and GetNext requests from the management station.
Public
Set Community Type the Set community, which is the password for incoming Set
requests from the management station.
Public
Trusted Host If you enter a trusted host, your ZyWALL will only respond to
SNMP messages from this address. A blank (default) field means
your ZyWALL will respond to all SNMP messages it receives,
regardless of source.
0.0.0.0
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: