Filter
Top Products
ZyWALL 2 User’s Guide
System Maintenance & Information 34-3
Table 34-1 Valid Commands
ether These commands display Ethernet information and configure Ethernet settings.
aux These commands display dial backup information and control dial backup connections.
ip These commands display IP information and configure IP settings.
ipsec These commands display IPSec information and configure IPSec settings.
34.2 Call Control Support
The ZyWALL provides two call control functions: budget management and call history. Please note that
this menu is only applicable when Encapsulation is set to PPPoE or PPTP in menu 4 or menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of the ZyWALL
within certain times. When the total outgoing call time exceeds the limit, the current call will be dropped
and any future outgoing calls will be blocked.
Call history chronicles preceding incoming and outgoing calls.
To access the call control menu, select option 9 in menu 24 to go to Menu 24.9 - System Maintenance -
Call Control, as shown in the next table.
Figure 34-3 Call Control
34.2.1 Budget Management
Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter 1 from Menu 24.9 - System
Maintenance - Call Control to bring up the following menu.
Menu 24.9 - System Maintenance - Call Control
1. Budget Management
2. Call History
Enter Menu Selection Number: