Filter
Top Products
ZyWALL 2 User’s Guide
34-4 System Maintenance & Information
Figure 34-4 Budget Management
The total budget is the time limit on the accumulated time for outgoing calls to a remote node. When this
limit is reached, the call will be dropped and further outgoing calls to that remote node will be blocked.
After each period, the total budget is reset. The default for the total budget is 0 minutes and the period is 0
hours, meaning no budget control. You can reset the accumulated connection time in this menu by entering
the index of a remote node. Enter 0 to update the screen. The budget and the reset period can be configured
in menu 11.1 for the remote node.
Table 34-2 Budget Management
FIELD DESCRIPTION EXAMPLE
Remote Node Enter the index number of the remote node you
want to reset (just one in this case)
1
Connection
Time/Total Budget
This is the total connection time that has gone by
(within the allocated budget that you set in menu
11.1).
5/10 means that 5 minutes
out of a total allocation of 10
minutes have lapsed.
Elapsed Time/Total
Period
The period is the time cycle in hours that the
allocation budget is reset (see menu 11.1.) The
elapsed time is the time used up within this period.
0.5/1 means that 30 minutes
out of the 1-hour time period
has lapsed.
Enter “0” to update the screen or press [ESC] to return to the previous screen.
34.2.2 Call History
This is the second option in Menu 24.9 - System Maintenance - Call Control. It displays information
about past incoming and outgoing calls. Enter 2 from Menu 24.9 - System Maintenance - Call Control to
bring up the following menu.
Menu 24.9.3 - Budget Management
Remote Node Connection Time/Total Budget Elapsed Time/Total Period
1.ChangeMe No Budget No Budget
2.-------- --- ---
Reset Node (0 to update screen):