The Harmonizer
Programmer’s Manual
The Harmonizer
Programmer’s Manual Page 19 of 97 Release 1.2.1
1999 Eventide, Inc.
Connecting Modules
To connect an input to an output simply click on the input
or output you want to start with, drag to the output or input
you want to connect to, and release. Go ahead and connect
the IIR module to the other stuff as shown to the right.
Also note that when you “hover” the pointer over an input or output for
a second, a “bubble” appears that describes what that input or output is.
Additionally, the lower left corner of the VSigfile window displays the
Module type you are hovering over, its name, the input/output name,
and what it is connected to (if anything).
Deleting Modules
To delete modules, first select the module slated for deletion by
clicking on it (its module type name will turn red). Then press the
“Delete” key on the keyboard or select the Delete Module
command from the Edit menu.
To delete more that one module at a time, just click and drag over
the area that contains the modules you would like to delete (in the
screen capture to the right, the multiply and the peak modules are being selected)
. All of
the modules that you select will have red module type names.
Then press the “Delete” key on the keyboard or select the Delete
Module command from the Edit menu.
UNPLUGGING CONNECTIONS
To unplug a connection, click on the input that terminates the connection and
press the “Delete” key on the keyboard. Away it goes. . .
