A SERVICE OF

logo

Open as PDF
next previous
The Harmonizer
Programmer’s Manual
The Harmonizer
Programmer’s Manual Page 79 of 97 Release 1.2.1
1999 Eventide, Inc.
Modifying Complex Modules
Some modules have specifiers that change the number of remaining specifiers in the module or the number of
some other type of input or output on the module. Consider these two composite screen images:
The major difference between these two examples of the c_switch module is that the module on the left
has its
number inputs: specifier set to 1 whereas the module on the right has its number inputs: specifier
set to
4. Since the c_switch module will always have its number inputs: specifier set to 1 when it is
first inserted, the
<modify> menu must be used to enable more inputs. Note that since the number of
control inputs in the c_switch module has changed, basic Patch Editor area display will show a different
icon for the module:
1 input c_switch:
4 input c_switch: