The Harmonizer
Programmer’s Manual
The Harmonizer
Programmer’s Manual Page 33 of 97 Release 1.2.1
1999 Eventide, Inc.
Editing “Special” Modules
A select few modules require a non-standard editing environment. To enter this “special” environment,
click on the special module and then select the second to last command under the Edit menu. The exact
phrasing of this command will change depending on what module you have selected. Here are some
examples:
“Curve” modules, the multitap module,
and the waveform module have a graphical
editor that is considerably easier to use than
the Harmonizer’s front panel.
The textblock module has its own editor.
Updating the Parameters from the Harmonizer
As you create more extensive programs, you’ll find yourself frequently Sending
incomplete version of a program to the Harmonizer as you work. When you
do, you will often change parameter values on the Harmonizer. It would be
quite irritating if you lost those parameter changes when you returned to work
in VSigfile.
Fortunately, you don’t have to. Once you’re done tweaking things in the
Harmonizer and are ready to return to VSigfile, select the Update params
command under the Midi menu. VSigfile will update all of the parameter values
in your patch from the Harmonizer.
Note: if you change the types, order or connections in VSigfile after you’ve sent
a program to the Harmonizer, you will not be able to Update it. You’ll get the
message shown to the right.
