Filter
Top Products
Administering ATM ARP Servers 9-15
Flushing the ARP
Cache
You might want to delete all entries from the ARP cache if the MAC address
has changed.
To remove all entries from the ARP cache, from the top level of the
Administration Console, enter:
ip arp flush
The ARP cache entries are immediately removed from the table.
Administering
ATM ARP Servers
If you are running classical IP over ATM with SVCs, you need to define an
ATM ARP server for each LIS. Each LIS must connect to a single ATM network
and must belong to the same IP subnet.
The
atmArpServer menu also includes the arp option, which allows you to
administer the ATM ARP cache.
Displaying ATM
ARP Servers
To display a list of ATM ARP servers, from the top level of the Administration
Console, enter:
ip atmArpServer display
Example:
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
➧arp
atmArpServer
multicast
udpHelper
routing
icmpRouterDiscovery
rip
ping
statistics
display
remove
➧flush
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
➧atmArpServer
multicast
udpHelper
routing
icmpRouterDiscovery
rip
ping
statistics
➧display
define
remove
arp
ATM address
47-0000-00-000000-0000-0000-00cc-000000000000-ff
IP routing is enabled, RIP is active,
ICMP router discovery is disabled
Index Port IP Address Subnet Mask
1 1 158.101.1.1 255.255.255.0