Filter
Top Products
9-18 CHAPTER 9: ADMINISTERING IP ROUTING
Flushing the ATM
ARP Cache
To remove all entries from the ATM ARP cache, from the top level of the
Administration Console, enter:
ip atmarpserver arp flush
The ATM ARP cache entries are immediately removed from the table.
Administering
UDP Helper
UDP Helper allows you to send User Datagram Protocol (UDP) packets
between routed networks. This protocol provides support for UDP services
such as BOOTP or DHCP (Dynamic Host Configuration Protocol), that rely on
the BOOTP relay agent. For example, by configuring the logical BOOTP port,
you can boot hosts through the router. UDP Helper also provides a relay
agent for DHCP broadcasts. UDP packets that rely on the BOOTP relay agent
are modified and then forwarded through the router.
The following ports for the UDP services are mentioned in this section on
UDP Helper:
■ BOOTP (including DHCP) = 67
■ TIME = 37
■ DNS = 53
UDP Helper allows you to configure the amount of time a UDP packet is
forwarded between subnetworks. UDP packets are discarded based on the
hop count and the seconds value only for BOOTP and DHCP.
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
interface
route
arp
➧atmArpServer
multicast
udpHelper
routing
icmpRouterDiscovery
rip
ping
statistics
display
define
remove
➧arp
display
remove
➧flush