Filter
Top Products
8-4 CHAPTER 8: ADMINISTERING VLANS
Example:
Select menu option (bridge/vlan): define
Enter Protocol Suite
(IP,IPX,AppleTalk,XNS,DECnet,SNA,Banyan,X.25,NetBIOS,NeBEUI,
default):
IP
Enter VLAN Identifier: 1
Enter VLAN Name: “SD Marketing”
Ports 1=FDDI, 2-17=Ethernet
Enter port(s) (1-17|all):
1-5
Layer 3 Address (undefined, defined): defined
Enter IP Subnet Address: 158.111.122.0
Enter subnet mask [255.255.0.0] 255.255.255.0
The maximum number of VLANs you can define on a single bridge is 32.
Modifying VLAN
Information
To modify VLAN information:
1 From the top level of the Administration Console, enter:
bridge vlan modify
You are prompted to reenter the information that defines the VLAN. Press
the Return or Enter key to accept any value that appears in brackets [ ].
2 Enter the number of the VLAN interface index.
3 Enter the protocol suite for that VLAN:
(IP, IPX, AppleTalk, XNS,
DECnet, SNA, Banyan, X.25, NetBIOS, NetBEUI, default)
.
4 Enter the VLAN identifier.
5 Enter the VLAN name.
6 Enter the number(s) of the port(s) or all.
7 If you have selected the IP protocol suite and want to use the Layer 3
address information, enter defined for layer 3 addressing. Enter
undefined if you do not want layer 3 addressing.
Top-Level Menu
system
ethernet
fddi
atm
➧bridge
ip
ipx
appletalk
snmp
analyzer
script
logout
display
mode
ipFragmentation
ipxSnapTranslation
addressThreshold
agingTime
stpState
stpPriority
stpMaxAge
stpHelloTIme
stpForwardDelay
stpGroupAddress
port
packetFilter
➧vlan
summary
detail
define
➧modify
remove