Filter
Top Products
Administering interfaces 9-3
this option, the system displays a list of available VLAN indexes and the
bridge ports associated with them.
■ LIS Interface — When you select LIS as the interface type, the
Administration Console prompts you for LIS interface information. The
information you enter depends on whether you define permanent virtual
circuits (PVCs), switched virtual circuits (SVCs), or both on the LIS interface.
See the LANplex® 2500 Operation Guide for more information on PVCs and
SVCs.
If you define SVCs, you need to enter an ATM ARP server address. This server
maintains the IP-to-ATM address translation table. You can enter the
maximum number of SVCs allowed on this interface. The minimum holding
time determines the least amount of time an SVC connection remains open.
The inactivity timer determines how long the connection can remain open
with no activity after the minimum holding time has expired. You also need
to enter the ATM port number for this interface.
If you define only PVCs on the interface, you need to enter only the PVC
numbers and the ATM port number. The other prompts do not appear
because you do not enter an ATM ARP server address. If you define both
SVCs and PVCs, enter all LIS interface information.
Displaying
Interfaces
You can display both summary and detailed information about all IP
interfaces configured for the system. The detail display contains all the
summary information as well as information about the advertisement
address, PVCs, and VLANs.
To display IP interface information, enter one of the following command
strings from the Administration Console top-level menu:
ip interface summary
OR
ip interface detail
Top-Level Menu
system
ethernet
fddi
atm
bridge
➧ip
ipx
appletalk
snmp
analyzer
script
logout
➧interface
route
arp
atmArpServer
multicast
udpHelper
routing
icmpRouterDiscovery
rip
ping
statistics
➧summary
➧detail
define
modify
remove
addAdvertisement
removeAdvertisement
addPVC
removePVC