Filter
Top Products
About VLANs 2-11
Example 2
Figure 2-2 is an example of a configuration that contains two different
protocol-sensitive VLANs (IP and IPX) with servers on separate high-speed
100BASE-T ports. The end-station clients share the same switch ports, yet
the IP and IPX traffic stays separate. See Figure 2-2.
.
Figure 2-2 A VLAN Configuration with Servers on Separate 100BASE-T ports.
Power Run
Process Power
Fan Temp
Config Inserted
ERROR PCMCIA
LANplex 2500
Modem Terminal
Fast Ethernet
100 BASEt
IP Server
VLAN #1, #2, and #3
IP Server
VLAN #1
IPX Server
VLAN #2
IPX
IPX
IPX
IP IP
IP
= VLAN 1 (IP)
= VLAN 2 (IPX)
= VLAN 1 (IP) + VLAN 2 (IPX)