Filter
Top Products
32 C
HAPTER
3: H
ARDWARE
D
ESCRIPTION
AND
I
NSTALLATION
WARNING: Only wall mount single units. Do not wall mount stacked OfficeConnect
units.
Using Rubber Feet and Stacking Clips
Attach the feet to the marked areas at each corner of the underside of your ISDN LAN
Modem to stabilize your ISDN LAN Modem and prevent sliding.
Use the four clips to stack OfficeConnect units together. You can stack up to four
units. Stack small units above large units.
Figure 18
Using Stacking Clips
1. Place your existing unit on a flat surface.
Your clips fit in these positions on the side
of the unit.
Small unit
Use these
holes
2. Position a clip over one of these holes
and push it until it clicks into place.
Repeat this for the other clip position on
the same side.
3. Keeping the front of the units aligned,
rest the bottom of the new unit on the
clips’ spikes. Push the clips firmly into
the new unit until they click into place.
Large unit
Use these
holes
Spike