Filter
Top Products
TCP/IP Setup Using Windows NT 4.0 37
Figure 25
Windows NT Protocols Configuration Window
3 Click
Add
.
The Select Network Protocol dialog box appears as shown in Figure 26.
Figure 26
Select Network Protocol Dialog Box
4 Select
TCP/IP Protocol
and then click
OK
.
The following message appears.
Figure 27
DHCP Message Box
5 Select the appropriate response for your network.
6 You are then prompted to insert your installation CD-ROM. Insert the Windows NT
4.0 CD ROM and then click
Continue
.
For users who have Remote Access Service (RAS) installed on their PC, after the
appropriate files are copied to your PC, a message box asks whether or not you
would like TCP/IP installed for RAS. If you select
Yes
, you must select the device
you want to access remotely and then click
Close
.
7 After the appropriate files are copied to your PC, you will see TCP/IP Protocol listed
in the Network Protocols group box, as shown in Figure 28.