Filter
Top Products
4
S
ETTING
U
P
TCP/IP
FOR
W
INDOWS
AND
M
ACINTOSH
This chapter describes how to set up the Windows and Macintosh operating
system (OS) TCP/IP stack. Your computer must have a TCP/IP stack in order to use
the ISDN LAN Modem. If you already have TCP/IP installed and set up on your
computer, then go on to Chapter 5. These instructions vary depending upon
which operating system you are using. Refer to the appropriate section.
■ TCP/IP Setup Using Windows 98 and Windows 95
■ TCP/IP Setup Using Windows NT 4.0
■ TCP/IP Setup Using Mac OS 7.6 or later
■ TCP/IP Setup Using Windows 3.11
TCP/IP Setup Using
Windows 98 and
Windows 95
TCP/IP is provided as part of the standard Windows 98 and Windows 95 operating
systems. To set up TCP/IP for the ISDN LAN Modem, do the following.
You may be prompted for your installation disks or CD-ROM.
1
From the Control Panel, double click Network.
The Network dialog box appears.
Figure 19
Network Dialog Box
2
Click Add.
The Select Network Component Type dialog box appears.