Filter
Top Products
Restricting Workstations from Accessing Service Provider(s) 65
Restricting
Workstations from
Accessing Service
Provider(s)
If you want to restrict a workstation(s) on the LAN from accessing a service
providers(s), do the following.
1
click
Workstation Parameters
from the ISDN LAN Modem home page.
2
Select the workstation from which you want to limit access.
3
Clear the check boxes located next to the names of the service provider(s) you
want to restrict from accessing that service provider over the LAN.
4
When finished, click
Submit
.
5
Repeat the previous steps for additional workstation access restrictions.
If you want to password protect the configuration profile of the ISDN LAN
Modem, refer to “Locking and Unlocking the Configuration.”
Configuring Your LAN
Parameters
This section describes how to configure the parameters of your LAN. (LAN refers to
that section of the network comprising your ISDN LAN Modem and all the
computers or other devices attached to it by means of Ethernet cabling.) This
section describes the LAN parameters and then provides configuration steps.
Understanding LAN
Parameters
The LAN Parameters window, shown in Figure 46, contains the following fields.
Figure 46
LAN Parameters Window
Name
Displays the name for the ISDN LAN Modem. This name is used for DNS. For
example, the name LANmodem is translated to its IP address 192.168.1.1.