Filter
Top Products
CLI Commands B-7
You must supply the name, internal ipx network number, node number, socket,
and type of service for this service. The user must also supply gateway information
to indicate the next router hop.
Below is a partial list of the IPX services available:
add network service
<service_name> status
server_type [server_type]
socket [socket_number]
enabled [YES]
data [“string”]
Parameter Description
<name> The name of the user for the IPX route.
Petitioned IPX address of the route, in IPX (xxxxxxxx) form.
Hops An integer representing how far away the route is, in “hops” through other
routers. Values are 1-15.
name Estimated interval in ticks it takes to deliver a packet to the remote network.
There are approximately 18 ticks per second.
node The internal MAC address of the server on which the service resides. This is
typically 00:00:00:00:00:01.
socket Indicates which “socket” the server listens on.
type Type of service: hex number referring to file server, print server, etc. Refer to
the table below.
Type Description
04 file server
05 job server
07 print server
09 archive server
0A job queue
21 NAS SNA gateway
2E dynamic SAP
47 advertising print server
4B Btrieve VAP 5.0
4C SQL VAP
7A TES-NetWare VMS
98 NetWare access server
9A Named Pipes server
9E PortableNetWare-UNIX
107 NetWare 386
111 Test server
166 NetWare management
26A NetWare management
26B Time synchronization
278 NetWare Directory server