Filter
Top Products
4-4 CHAPTER 4: QUICK SETUP
TELNET information
For TELNET management of the system, you need to create a user name and
password to control access.
Quick Setup IP Information
The OCR 812 uses a network name to identify the network for future
management commands.
The IP mask can be specified either as a class ("A", "B", or "C"), the number of
one bits in the mask, or as an address in the format 255.x.x.x.
You need to specify the framing for the IP network. It should be either
"ethernet_ii" or "snap".
You can use the Routing Information Protocol (RIP) to exchange routing
information with other routers on the network.
Question Default Your System
Do you want to allow command line management via
TELNET?
[yes]
Question Default Your System
What user name will be allowed to manage this system? [root]
What password will be used for this user ? [ ]
Question Default Your System
Enter the network name of your IP network: [ip]
Enter the IP address for the OfficeConnect Remote
812:
[192.168.200.25
4]
Question Default Your System
What should the mask be set to? [C]
Question Default Your System
What is the framing for the IP network? [ethernet_ii]
Question Default Your System
Do you want to run RIP? [yes]
Choose the version of RIP to run: [v2]