Filter
Top Products
5
QUICKVC SETUP
This chapter will describe in detail the operations of the OCR 812 QuickVC Setup
Wizard program. It will identify the required information, steps involved, and
sample output scripts from the execution of this program.
CLI QuickVC Setup
Script
Introduction The CLI QuickVC Setup program allows you to quickly configure remote site
profiles (virtual channel connections) for your OCR 812. Instead of using cryptic
commands you will simply respond to a series of questions regarding different
aspects of your configuration. The program will convert your responses into the
appropriate CLI commands and execute them.
The OCR 812 can be configured as an ATM device. Depending on the present
configuration, the QuickVC script will prompt you for the appropriate parameters.
Instructions This section contains the CLI QuickVC Setup script for all possible OCR 812 Virtual
Channel (VC) configurations. You will be required to enter information concerning
network configurations. Questions in the CLI QuickVC Setup script are presented
here in tables.
Write the appropriate information for your desired configuration in the following
tables.
Starting QuickVC Setup
OCR-DSL> quickvc
Welcome to the OCR 812 QuickVC Setup Wizard
The VC Setup Wizard allows you to add and configure a VC profile on your OCR
812. Each profile must have a unique name.
ATM Parameters The characteristics of the ATM Virtual Circuit must be configured.
Question Default Your System
What is the name to be added ? [ ]
Question Default Your System
Enter the Virtual Path Identifier [0]
Enter the Virtual Channel Identifier [0]
Is the Category of Service (U)br or (C)br ? [U]
Enter the Peak Cell Rate: [0]