3Com OfficeConnect Remote 812 Network Router User Manual


 
CLI Commands B-51
show ppp on vc
<vc_name> counters
This shows counters for the Point-to-Point Protocol on the Virtual Circuit.
show ppp on vc
<vc_name> settings
This shows the settings for the Point-to-Point Protocol on the Virtual Circuit.
show ppp on interface
<name> counters
Displays statistics for PPP running on the specified interface.
COUNTERS for PPP BUNDLE 1
Operational Status - not opened or opened
Number Active Links - sum of active links using this PPP bundle
Transmit Packets - sum of packets transmitted over this bundle
Bytes from Upper Layer - sum of bytes received from an upper layer
application for transmission over this bundle. This counter represents all
data handed down to the PPP application BEFORE compression occurs.
Bytes to Lower Layer - sum of bytes sent to a lower layer application for
transmission over this bundle. This counter represents all data to be handed
down to the lower layer application AFTER compression occurs.
Received Packets - sum of packets received from a lower layer application
over this bundle
Bytes to Upper Layer - sum of bytes to be handed up to an upper layer
application over this bundle
Bytes from Lower Layer - sum of bytes received from a lower layer
application over this bundle
Total Bad Headers - sum of packets with incorrect PPP Header (Address,
Control, PID Field)
COUNTERS for PPP LINK 1 - 5
Operational Status - not opened or opened
Received Packets - too long
Transmit Frames - sum of frames received from the PPP application for
transmission over this link
Bytes from Upper Layer - sum of bytes handed down from an upper layer
application for this link
Bytes to Lower Layer - sum of bytes received from a lower layer
application for this link
Received Frames - sum of frames received on this link
Bytes to Upper Layer - sum of bytes handed up to an upper layer
application over this link
Bytes from Lower Layer -sum of bytes received from a lower layer
application over this link
show ppp on interface
<name> settings
Displays the settings for PPP on the specified WAN interface.