Filter
Top Products
4-6 CHAPTER 4: QUICK SETUP
Quick Setup Bridge Information
The network name is used by the OCR 812 to identify your bridging setup.
The spanning tree algorithm is used to eliminate loops in a network that is linked
together with bridges.
Would you like to review your current settings before executing [yes]?
Sample Identification Information
This section contains a sample of possible settings.
Management Information:
Console Login Required: yes
Console Login Password: password
SNMP Management:
SNMP Community: public
SNMP IP Address: 0.0.0.0
SNMP Read&Write: yes
TELNET Management:
TELNET User: root
TELNET Password: !root
IP Information:
IP Network Name: ip
IP Network Address: 192.168.200.254
IP Mask: C
IP Frame Type: ethernet_ii
IP RIP: v2
DHCP Server: Enabled
DHCP Pool Start IP Address: 192.168.200.1
DHCP Pool End IP Address: 192.168.200.40
TFTP Server Information:
TFTP Access: Any system
IPX Information:
IPX Network Name: ipx
IPX Network Number: 12345661
IPX Frame Type: ethernet_ii
Bridge Information:
Bridge Network Name: bridge
Spanning Tree: no
Do you want to change any answers [no]?
Do you want to actually execute these commands [yes]?
Question Default Your System
Enter the network name: [bridge]
Question Default System
Do you want to run the spanning tree algorithm? [no]