Filter
Top Products
CLI Quick Setup Script 4-5
The OCR 812 can act as a DHCP server, providing IP addresses to other stations on
the local LAN.
It is possible to restrict access to the TFTP server to a specific system or a list of
systems. Quick Setup will allow you to enter one system that is allowed or allow
access to all systems.
IP setup is completed.
Quick Setup IPX Information
The network name is used by the OCR 812 to identify your IPX network.
The network number is a non-zero hexadecimal number of up to 8 digits.
You need to specify the framing for the IPX network. It should be one of the
following: “ethernet_ii”, “snap”, “dsap”, “novell_8023.”
Question Default Your System
Do you want the OfficeConnect Remote 812 to act
as a DHCP server?
[yes]
Enter the start address for the DHCP IP address
pool:
[ ]
Enter the end address for the DHCP IP address
pool:
[ ]
Question Default Your System
Do you want to allow all systems to access the TFTP
server?
[yes]
Question Default Your System
Enter the name of your network: [ipx]
Question Default System
Enter the ipx network number: [ ]
Question Default System
What is the framing for the IPX network ? [ethernet_ii]