Filter
Top Products
CLI Commands B-23
PING
ping
<ip_name_or_addr>
output [output_filename]
count [count]
interval [interval]
timeout [timeout_value]
Sends an ICMP echo request to a remote IP host. A reply from the pinged address
indicates success.
QUICKVC Runs the QuickVC Setup program to easily configure a virtual channel connection
(remote site profile). See Chapter 5 for a complete description of the QuickVC
Setup program.
REBOOT Reboot the system. If you have made any configuration changes, be sure to save
all before rebooting. Also see the delete configuration command.
RENAME
rename file
<input_file>
<output_file>
Renames files within the FLASH file system.
The FLASH file system is a flat file system (no subdirectories). Use the list files
command to see what files currently exist.
RESOLVE
resolve name
<ip_host_name>
Returns an IP Address for the specified host name by sending it to DNS for
resolution. If the Domain Name has been specified using the set DNS command, it
will also be resolved, otherwise you must specify it as part of the name. This
command requires either a DNS local host entry (use add DNS host) or a DNS
server (use add DNS server) to resolve the host name. It is the reverse of the ARP
command.
More (or CR) Continue printing
Parameter Description
<ip_name_or_address> IP address in dotted notation, or host name of remote system.
output A file name to direct output to.
count Number of ICMP echo requests to send.
interval Number of seconds to wait between sending each request.
timeout Number of seconds to wait for an echo response to return.
Parameter Description
<input_file> Name of the original file.
<output_file> New name for the file