Filter
Top Products
CLI Commands B-31
set ipx system priority [priority level]
default_gateway [ipx_host_add]
initial_pool_address [ipx_addr]
pool_members [number]
Sets parameters for dynamic IPX networks.
set network service
<admin_name>
server_type [server_type]
socket [socket_number]
data [“string”]
close_active_connections [TRUE | FALSE]
Sets parameters for configured network services.
You can list the configured network services using list network services. The
service must be disabled for this command to work.
packet_maximum_size Maximum size packet that this IPX network will support.
rip Sets the RIP mode.
rip_age_multiplier Number to multiply the rip_update_interval by, to obtain the value
for the aging out the entries in the RIP database.
rip_packet_size Size of RIP packets.
rip_update_interval How often RIP should send periodic updates.
sap Sets the SAP mode.
sap_age_multiplier Number to multiply the sap_update_interval by, to obtain the value
for aging out entries in the SAP database.
sap_packet_size Size of SAP packets.
sap_nearest_replies Whether or not SAP will look its nearest neighbors.
sap_update_interval How often RIP should send periodic updates.
Parameter Description
priority Priority for the dynamic IPX network.
default_gateway Default router for the dynamic IPX network.
initial_pool_address Initial IPX address used to dynamically assign IPX network.
pool_members Number of addresses to reserve in the pool of IPX addresses used when
dynamically assigning IPX networks.
Parameter Description
<admin_name> Designation you assigned to network service with the add
network service command. Limit of 32 characters.