Filter
Top Products
B-22 APPENDIX B: CLI COMMAND DESCRIPTION
list tcp connections Displays information about all TCP connections. Connection status is defined in
RFC-793.
Local Address - IP address of the local host for this connection
Local Port - TCP port number used by the local connection
Remote Address - IP address of the remote host for this connection
Remote Port - TCP port number used by the remote connection
Status - status of the connection. E.g.: Listen
list tftp clients Displays IP addresses of all users who allowed to use the Trivial File Transfer
Protocol (TFTP) to connect to the system. You must have used add network service
to add TFTP support to the system and used add tftp client to authorize users to
connect.
list udp listeners Displays User Datagram Protocol (UDP) ports being used by the system. These
ports correspond to processes which are receiving UDP data (for example SNMP,
User Management, TFTP service). Local IP addresses and port numbers are listed
for each UDP port.
list tunnel Lists (displays) the name and status of tunnels.
list users Lists all users, showing:
User Name - user designation you specified using add user
Login Service - The service used to login to the network (i.e. TELNET).
Status - link status: ACTIVE, INACTIVE or DISABLED
list vc Lists all virtual channel profiles, showing:
Name - user designation you specified using add vc
Network Service - type of network service: RFC1483, PPP, PPPLLC
VPI - Virtual Path Identifier
VCI - Virtual Channel Identifier
Status - link status: ACTIVE, INACTIVE or DISABLED
login_required Enables or disables CLI password protection.
password The CLI password. It must consist of 1 to 8 alphanumeric (printable) characters,
inclusive.
PAUSED COMMANDS
More (or CR) Continue printing
Quit Cancel rest of output