Filter
Top Products
CLI Commands B-47
show ip counters Displays system wide IP network statistics.
INPUT COUNTERS
Total Input Datagrams - sum of IP datagrams received
Bad Headers - number of datagrams with bad headers
Bad Addresses - number of datagrams with bad addresses
Forwarded Packets - number of packets forwarded
Bad Protocol - number of packets received with bad protocol
Discarded - number of packets discarded
Successfully Delivered - number of packets successfully received
OUTPUT COUNTERS
Total Output Datagrams - sum of datagrams transmitted
Discarded - number of datagrams discarded
Bad Routes - number of datagrams with a bad route
Fragments Needing Reassembly - # of fragmented datagrams
Datagrams Successfully Reassembled - # of broken datagrams
successfully reassembled
Reassembly Failures - # of broken datagrams unsuccessfully reassembled
Datagrams Successfully Fragmented - datagrams successfully broken
before transmission
Fragmentation Failures - failed datagram fragmentations before
transmission
Total Fragments - sum of fragments transmitted
show ip settings Displays system wide IP information.
IP Dynamic Address Pool Begin - start of IP address range
IP Dynamic Address Pool Size - size of IP address range
IP System Host Address - IP address of the system
IP Forwarding - ENABLE or DISABLE forwarding of IP packets
show ip network
<network_name>
settings
Displays parameter settings for the specified IP network. See the set ip network
command on page 29 for additional details.
Interface - interface this IP network runs on
Network Address - network address of this IP network
Frame Type - frame type used by the interface
Status - ENABLED, ACTIVE, INACTIVE, DISABLED
Reconfigure Needed - This is TRUE or FALSE.
Mask - subnet mask used by this IP network
Station - station address of this IP network