111
Use the [Tab] key to select the cable type, test type,
or wire gauge for editing. Use the [Up] and [Down]
keys to highlight the desired cable type or wire
gauge. Press [Enter] to accept the changes and return
to the previous screen. Use the [Return] key to exit
without making changes.
Connect the red test lead to ring of the pair, the black
lead to the tip, and the green lead to ground. From
the Auto Menu Screen, press the [Enter] key to start
the Autotest. The Inactive Pair results screen will
appear.
Inactive Pair - Basic Test
Inactive Pair - Full Test