Filter
Top Products
Configuring the Switch
3-96
3
Command Attributes
• Member List (Current) – Shows configured trunks (Unit, Port).
• New – Includes entry fields for creating new trunks.
- Unit – Stack unit
11
. (Range: 1-1)
- Port – Port identifier. (Range: 1-28)
Web – Click Port, LACP, Configuration. Select any of the switch ports from the
scroll-down port list and click Add. After you have completed adding ports to the
member list, click Apply.
Figure 3-55 LACP Trunk Configuration
11. Stacking is not supported in the current firmware.