Filter
Top Products
DHCP Commands
4-135
4
Usage Guidelines
•An address specifies the client’s IP address. If an asterisk (*) is used as the
address parameter, the DHCP server clears all automatic bindings.
•Use the no host command to delete a manual binding.
• This command is normally used after modifying the address pool, or after
moving DHCP service to another device.
Example.
Related Commands
show ip dhcp binding (4-135)
show ip dhcp binding
This command displays address bindings on the DHCP server.
Syntax
show ip dhcp binding [address]
address - Specifies the IP address of the DHCP client for which bindings
will be displayed.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Example
Console#clear ip dhcp binding *
Console#
Console#show ip dhcp binding
IP MAC Lease Time Start
(dd/hh/mm/ss)
--------------- ----------------- ------------------ -----------
192.1.3.21 00-00-e8-98-73-21 86400 Dec 25 08:01:57 2002
Console#