Accton Technology ES3628C Switch User Manual


 
Glossary-3
Glossary
IEEE 802.1Q
VLAN Tagging—Defines Ethernet frame tags which carry VLAN information. It
allows switches to assign endstations to different virtual LANs, and defines a
standard way for VLANs to communicate across switched networks.
IEEE 802.1p
An IEEE standard for providing quality of service (QoS) in Ethernet networks. The
standard uses packet tags that define up to eight traffic classes and allows switches
to transmit packets based on the tagged priority value.
IEEE 802.1s
An IEEE standard for the Multiple Spanning Tree Protocol (MSTP) which provides
independent spanning trees for VLAN groups.
IEEE 802.1X
Port Authentication controls access to the switch ports by requiring users to first
enter a user ID and password for authentication.
IEEE 802.3ac
Defines frame extensions for VLAN tagging.
IEEE 802.3x
Defines Ethernet frame start/stop requests and timers used for flow control on
full-duplex links. (Now incorporated in IEEE 802.3-2002.)
IGMP Snooping
Listening to IGMP Query and IGMP Report packets transferred between IP Multicast
Routers and IP Multicast host groups to identify IP Multicast group members.
IGMP Query
On each subnetwork, one IGMP-capable device will act as the querier — that is, the
device that asks all hosts to report on the IP multicast groups they wish to join or to
which they already belong. The elected querier will be the device with the lowest IP
address in the subnetwork.
Internet Control Message Protocol (ICMP)
A network layer protocol that reports errors in processing IP packets. ICMP is also
used by routers to feed back information about better routing choices.
Internet Group Management Protocol (IGMP)
A protocol through which hosts can register with their local router for multicast
services. If there is more than one multicast switch/router on a given subnetwork,
one of the devices is made the “querier” and assumes responsibility for keeping
track of group membership.