SNMP Commands
4-115
4
snmp-server view
This command adds an SNMP view which controls user access to the MIB. Use the
no
form to remove an SNMP view.
Syntax
snmp-server view view-name oid-tree {included | excluded}
no snmp-server view view-name
• view-name - Name of an SNMP view. (Range: 1-64 characters)
• oid-tree - Object identifier of a branch within the MIB tree. Wild cards can
be used to mask a specific portion of the OID string. (Refer to the
examples.)
• included - Defines an included view.
• excluded - Defines an excluded view.
Default Setting
defaultview (includes access to the entire MIB tree)
Command Mode
Global Configuration
Command Usage
• Views are used in the snmp-server group command to restrict user access
to specified portions of the MIB tree.
• The predefined view “defaultview” includes access to the entire MIB tree.
Examples
This view includes MIB-2.
This view includes the MIB-2 interfaces table, ifDescr. The wild card is used to select
all the index values in this table.
This view includes the MIB-2 interfaces table, and the mask selects all index entries.
Console(config)#snmp-server view mib-2 1.3.6.1.2.1 included
Console(config)#
Console(config)#snmp-server view ifEntry.2 1.3.6.1.2.1.2.2.1.*.2 included
Console(config)#
Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.* included
Console(config)#