Filter
Top Products
VLAN Commands
4-201
4
show interfaces protocol-vlan protocol-group
This command shows the mapping from protocol groups to VLANs for the selected
interfaces.
Syntax
show interfaces protocol-vlan protocol-group [interface]
interface
• ethernet unit/port
- unit - Stack unit
53
. (Range: 1-1)
- port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-12)
Default Setting
The mapping for all interfaces is displayed.
Command Mode
Privileged Exec
Example
This shows that traffic entering Port 1 that matches the specifications for protocol
group 1 will be mapped to VLAN 2:
53. Stacking is not supported in the current firmware.
Console#show interfaces protocol-vlan protocol-group
Port ProtocolGroup ID Vlan ID
---------- ------------------ -----------
Eth 1/1 1 vlan2
Console#