Filter
Top Products
3-8 User’s Manual
3.6 External Mouse
This notebook accepts either a serial mouse or PS/2-compatible mouse or
similar pointing device.
If you use a serial mouse, plug it into the serial port ( ) on the rear
panel. See Figure 3-3. If you use a PS/2-compatible mouse, plug it into the
keyboard/ keypad/mouse connector (
) on the rear panel.
The built-in touchpad works simultaneously with an external
PS/2-compatible mouse if one is connected.
After installing the mouse, turn on the system. For DOS and
Windows 3.x environments, run a mouse driver to activate the
mouse. Read the mouse manual for more information. Under
Windows 95, run the Add New Hardware Wizard in the Control
Panel folder to search for the serial mouse and load the
necessary driver.
Figure 3-3 Connecting a Monitor, a Serial Mouse and a Parallel Printer