Acer NOTE LIGHT Laptop User Manual


 
1-26 User’s Manual
1.12 Using the Notebook for the First Time
Follow these steps when you use the notebook for the first time, to ensure
top performance right from the start.
1. Install the battery pack into the notebook.
2. Connect the AC adapter. See section 1.7.
3. Power on the notebook and condition the battery pack. See section
2.3.2 for details.
When the battery is charging, the battery indicator turns orange. It
turns off when the battery pack is fully charged.
4. Power on the system when the battery is fully charged. If your
notebook has pre-installed software, go directly to item 6;
otherwise, insert MS-DOS
diskette #1 into the diskette
drive and boot up the system.
Follow the instructions to install
MS-DOS.
You may also want to install Windows or Windows 95 if your package
includes it. Insert Windows diskette #1 into the diskette drive and type
A:\SETUP. Follow the screen instructions to install Windows.
Refer to the Windows or Windows 95 user’s manual for details.