Filter
Top Products
2-8 User’s Manual
In this situation, there are four ways to enter suspend mode:
• Press the standby/suspend button ( )
If the notebook beeps but does not enter suspend mode after
pressing the standby/suspend button, it means the operating
system does not allow the notebook to enter the power saving
mode.
• Set a value for the System Standby/Suspend Timer in Setup. If the
waiting time specified by this time elapses without any system activity,
the system goes into suspend mode
• Enable the Suspend upon Battery-low parameter in Setup. If a battery-
low condition takes place, the notebook enters suspend mode in about
three minutes. See section 2.6.
• Invoked by the operating system power saving modes
When the notebook enters suspend mode, the whole system does not
consume any power.
To exit system suspend mode, press the power switch (
).
Do not change any system devices when the notebook is in
suspend mode.
If the notebook is connected to a LAN environment or has a
current modem connection, it does not resume connection
even after the notebook returns to normal operating mode.