Filter
Top Products
4-2 User’s Manual
4.2 Entering Setup
To enter Setup, press m during POST or the no-reboot Setup button ( ).
Pressing m during POST allows you to access the complete Setup utility.
The system reboots when you exit Setup to make any changes take effect.
Pressing the no-reboot Setup button ( ) allows you to access the
Advanced System Configuration screens and the system does not reboot
when you exit from Setup. It simply returns you to where you left off before
entering Setup.
If the notebook is connected to a LAN environment or has a
current modem connection, note that it may not resume
connection after the notebook returns to normal operating
mode.
After pressing m during POST, the Setup main menu appears:
SETUP Utility
Basic System Configuration
Advanced System Configuration
System Security
Load Setup Default Settings
= Move Highlight Bar, = Select, Esc = Exit and Reboot
↑ ↓ ← → ↵