Filter
Top Products
128
Actiontec Wireless Broadband Router User Manual
129
Chapter 8 Using Advanced Settings
To define a new connection with a fixed IP address:
1. Click New Static Connection in the DHCP Connections screen. The “DHCP
Connection Settings” screen appears.
2. Enter a host name for this connection.
3. Enter the fixed IP address to assign to the computer.
4. Enter the MAC address of the computer’s network card.
5. Click the Apply to save changes.
☞
Note: A device’s fixed IP address is actually assigned to the spe-
cific network card’s MAC address installed on the network com-
puter. If this network card is replaced, the device’s entry in the
DHCP Connections list must be updated with the new network
card’s MAC address.
To remove a host from the table, click the appropriate “Delete” icon in the
Action column.